CGR – Single Acting – Pancake Lock Nut – Load Return Cylinders

Force: 60-900 t
Stroke: 50 mm
Max Working Pressure: 700 Bar

Features

Pancake lock ring cylinders have a system that prevents any possible over-stroke. The rod on these cylinders has a coloured area that appears 10 mm before the maximum stroke has been reached. This version does not conform to ANSI B30.1.

These cylinders are particularly suitable for applications in which the load has to be left in a raised position for long periods. The threaded safety nut, which blocks mechanically the cylinder boby, allows to operate in total safety under the load. All cylinders are supplied with integrated tilt saddles and eyelets in order to ease their transport.

Operational Areas

Accessories

• Integrated tilt saddle, reduces the effects of possible off-centred loads.

  CGR cylinders have been designed for use in applications where space is limited and to stand the full load even without a pressure distribution plate below. It is anyhow recommended that pressure plates are placed both under the base and on top of the saddle to distribute the load if the support resistance is not compatible with the pressure shown in the chart. Non compliance with this notice could result in damage to the cylinder and/or the load being lifted.

Although the standard tilt saddle allows to adjust the working load, it’s suggested to avoid any side components, especially if the cylinder has more than 20 mm of stroke.

Selection Chart