Burst Sleeve /mm
$0.016 – $0.099 ex GST
Description
Burst Sleeve – PIN HOLE, BURST PROTECTION, ABRASION PROTECTION
Burst Sleeve
- Tested over 1.7 million abrasion cycles (ISO 6945).
- Meets “Line of Sight” operator protection specification EN982, ISO Norm 833, EN414, ISO Regulation 3457:2003(9.1).
- Pinhole protection tested to 4,000 PSI. Burst protection Tested to 12,000 PSI.
- Cut to length, 50% less bulky thank Cordura.
- Tight, smooth surface contains oil spillage from pin hole leaks.
- Reduces sleeve installation by up to 80% (PRO version only).
- Mine safety and Health Administration (MSHA) approved IC-289/01.
- Meets conductivity standard ISO 8031.
- Unmatched UV Protection.
| MJ Hydraulic Part Number | Sleeve ID |
| mm | |
| HS-17 | 17 |
| HS-20 | 20 |
| HS-23 | 23 |
| HS-25 | 25 |
| HS-27 | 27 |
| HS-31 | 31 |
| HS-36 | 36 |
| HS-40 | 40 |
| HS-44 | 44 |
| HS-47 | 47 |
| HS-55 | 55 |
| HS-60 | 60 |
| HS-73 | 73 |
| HS-75 | 75 |
| HS-93 | 93 |
| HS-112 | 112 |
Additional information
| Model | HS-17, HS-20, HS-23, HS-25, HS-27, HS-31, HS-36, HS-40, HS-44, HS-47, HS-55, HS-60, HS-73, HS-75, HS-93, HS-112 |
|---|
