Hydraulic hoses AP

Hydraulic hoses 700 Bar with standard lengths up to 10m. Hoses can be supplied in any length on request. 700 Bar working pressure, 4:1 safety factor.

• 4:1 Safety Factor.
• 700 bar working pressure.
• Wide range of standard hydraulic hoses up to 10 metres. Hoses can be supplied in any length on request.
• Rubber Guard on both ends.
• 3/8 inch;-NPT thread on each end. Can be supplied with couplers on one or both ends.
• Internal Diameter 6,4 mm; Oil Capacity: 35 cm3 per metre.
• Minimum Bending radius: 115 mm.
• WARNING: Never disconnect the hose when the system is pressurized. Never exceed the maximum working pressure of the hose.
• NOTE: Apply 2 rounds of Teflon around all 3/8 inch; NPT threads of the system, in the thread direction, leaving the first thread uncovered to prevent the tape breaking and entering the hydraulic system. Torque: 80Nm.